How to Remove the Entire RT Rear End – Step-By-Step Guide | Ultimate Touring Build | Part 4

MartinTheVlogger
6 hours ago
2 min read

Welcome to Part 4 of the Ultimate Touring Build, where we take on one of the biggest jobs on the Can-Am Spyder RT — removing the entire rear end of the bike. In How to Remove the Entire RT Rear End – Step-By-Step Guide | Ultimate Touring Build | Part 4, I walk you through the exact process needed to take apart the rear of the 2020 - 2025 Spyder RT (RT20+) so you can access every cable, latch, connector, and light hidden behind the panels.

Can-Am Spyder RT - how to tear down the rear part

This video is extremely useful if you need to:

• Install any rear light or LED accessory

• Change the reverse light (like we do in this episode)

• Replace or repair the saddlebag lanyards (common failure on RT models)

• Reach wiring harnesses for aftermarket upgrades

• Install camera system

• Understand how the new 2020–2025 Spyder RT rear structure is built

Part 3: Connecting Your Phone to the 2025 Spyder RT | Ultimate Touring Build

MartinTheVlogger and Can-Am Spyder RT 2025 touchscreen display

Ultimate Touring Build – Part 2: Why I Chose the RT2025 (Ryker vs F3 vs Canyon) #canam #spyderrt

MartinTheVlogger compares Can-Am Spyder, Ryker and Canyon

Part 1 - Ultimate Touring Build – Part 1: You Won’t Believe What I Bought! #canam #motovlog #rider

MartinTheVlogger and new 35.000€ Can-Am

This is only the beginning — in the next episodes, we’ll tear this machine apart, upgrade everything from performance to comfort, and create the ultimate long-distance touring monster.

Video from: Can-Am Adventure Tour Tuscani vs Dolomites 2025 | The Ultimate Can-Am Spyder & Ryker Experience in Europe! #moto

List of all TOURS you can find here