top of page
template copy-1.png
spyder & ryker meetings-1.jpg
resize banner-1.jpg

Easy Job - Oil Change Can-Am RYKER with Tips and Tricks

In this video, we'll be showing you how to change the oil on a Can-Am Ryker 600, Ryker 900, Sport, or Rally model. Whether you're a seasoned mechanic or a beginner, this step-by-step guide will help you get the job done quickly and easily. Follow along as we walk you through all the necessary tools and steps to ensure your Ryker is running smoothly and therefore you prolong the life of your engine.

In todays video you will find

0:00:41 - What is needed for oil change on Can-Am RYKER

0:02:28 - Tool required for oil change

0:05:12 - What to be careful about when changing oil

0:07:30 - how to remove the oil

0:08:54 - Magnetic drain plug explanation

0:11:04 - How to remove oil filter

0:12:18 - Top tip on changing the oil

0:13:12 - How to reinstall the oil filter

0:15:56 - How to reinstall the drain plugs

0:16:45 - How to refill the oil

0:19:23 - How to check the oil level on Can Am RYKER

Just click on Blue Time Line and you will be moved to that part of the video


Before you get started, make sure you have all the necessary tools and materials on hand. You'll need a new oil filter, a new oil drain plug gasket, and the appropriate oil for your Ryker model. You'll also need a socket set, a torque wrench, a funnel, a drain pan, and some rags or shop towels. Once you have everything you need, follow these steps:

1 - Warm up the engine by running it for a few minutes. This will help loosen the old oil and make it easier to drain.

2 - Place the drain pan under the oil drain plug and remove the drain plug using the socket set. Let the oil drain completely.

3 - Replace the oil drain plug gasket and reinstall the drain plug, using the torque wrench to tighten it to the specified torque.

4 - Remove the oil filter using the oil filter wrench. Be careful not to spill any oil as you remove the filter.

5 - Install the new oil filter, using a new oil filter gasket if necessary. Tighten the filter to the specified torque.

6 - Add the new oil to the engine, using the funnel to pour it into the oil fill hole.

7 - Check the oil level with the dipstick and add more oil if necessary.

8 - Start the engine and let it run for a few minutes to circulate the new oil.

9 - Then, shut off the engine and check the oil level again.


That's it! You've successfully changed the oil on your Can-Am Ryker. Be sure to dispose of the old oil and oil filter properly and follow the recommended oil change intervals to keep your Ryker running smoothly. With these simple steps, you can easily change the oil on your Can-Am Ryker 600, Ryker 900, Rally, or Sport and keep it running smoothly.


The Ryker 600, Ryker 900, Rally, and Sport are powered by a 600cc or 900cc Rotax ACE engine and have a dry weight of 473 lbs (214 kg). Thanks for watching, and be sure to check out our other videos for more tips and tricks.


Specs & Features Can-Am Ryker

is highly flexible and adjustable ensuring that every ride is a thrill ride. Its low seating position allows heightened comfort, further ability to feel the road, tackle tight turns, and much more. Gear up on a safer, more confident ride with an intuitive twist-and-go transmission and no gear shifting.

Can-Am Ryker Rally Edition offers specifications listed below:

Engine – Rotax ACE 900cc triple-cylinder engine

Transmission – Automatic transmission (CVT) with reverse function

Suspension – Front: KYB HPG with preload adjustment / 6.38 in. (162 mm), Rear: KYB HPG 40mm with remote reservoir 4-position compression adjustable damping and preload adjustment / 6.89 in. (175 mm)

Cargo capacity – Glovebox with USB, 1.85 gal (7 L)

Riding modes – Eco Mode, Sport Mode, and Rally Mode

Horsepower: 82 HP Torque: 58.3 lb-ft

Dry Weight: 616 lbs (280 kg)

Seat Height: 24.2 in (615 mm)


Official MartinTheVlogger page: https://www.martinthevlogger.com

Video & photo copyright: ©MartinTheVlogger

Author: MartinTheVlogger (Martin Pohanka)

Camera used: 2x GoPro Hero 9 Black,

Music Credit: www.epidemicsound.com

 

About MartinTheVlogger I am crazy motorbike rider, who wants to travel the World with his bYke also known as "TheBeast" [BRP Can-Am Spyder F3s].


In my vlogs you will find interesting places, epic drone videos, crazy moments and lot of fun and relax atmosphere.


MTV OnlineShop

©MTV Manufacturing Contact me on Facebook or Instagram or martinthevlogger@gmail.com or

https://www.MartinTheVlogger.com